Fujitsu ETERNUS AF Series Configuratiehandleiding - Pagina 8
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS AF Series. Fujitsu ETERNUS AF Series 38 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu ETERNUS AF Series: Configuratiehandleiding (16 pagina's), Veiligheidsmaatregelen (12 pagina's)
Pagina afdrukken
Chapter 1
Workflow
Setting Up the Fibre Channel Switches
If a Fibre Channel switch is to be used, set it up now.
"Chapter 7 Setting Up the Fibre Channel Switches" (page 19)
•
Checking the Fibre Channel switch connection requirements
•
"Server Support Matrix for FC-SWITCH"
-
Installing the Fibre Channel Card Drivers and Setting the Parameters
Install the Fibre Channel card drivers, and set up the server environment.
•
"8.1 Installing the Driver" (page 21)
"8.2 Setting Up the Driver Parameters" (page 21)
•
Checking the Fibre Channel card driver versions
•
-
"Server Support Matrix"
For the standard multipath driver or the ETERNUS
Installing the Multipath Driver
Install the ETERNUS Multipath Driver before using
it.
"8.3 Installing the Multipath Driver" (page 23)
•
Installing the Multipath Driver
•
Installation & Configuration Guide
-
Setting Up the Server to Recognize the Logical Units
Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.
"9.2 Setting Up the Server to Recognize the Logical Units" (page 25)
•
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
Multipath Driver
8
Copyright 2018 FUJITSU LIMITED
For single-path connection or Veritas Volume
Manager
Installing the FJspio Package
Install the FJspio.
"8.4 Installing the FJspio Package" (page 23)
•
P3AM-3782-23ENZ0