Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 15

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 44 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Pagina afdrukken
Fujitsu ETERNUS DX Disk Configuratiehandleiding
Chapter 1
Workflow
1.3
For Emulex Drivers
When the ETERNUS Multipath Driver or the GR
Setting the Multipaths
Install the multipath software and set up the mul-
tipath connections. Settings will depend on which
multipath software is being used.
"Chapter 9 Setting the Multipaths" (page 38)
•
"FUJITSU Storage ETERNUS DX Configuration
•
Guide -Server Connection- (Fibre Channel) for
Oracle Solaris Multipath Driver Settings"
Installing and setting up the Multipath Driver
•
-
Multipath Driver product manual
Checking the corresponding Multipath Driver
•
"Server Support Matrix"
-
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris
Multipath Driver is used
15
Copyright 2015 FUJITSU LIMITED
When the ETERNUS Multipath Driver or the GR
Multipath Driver is not used
Setting Up the Server to Recognize the Logical
Units
The sd or hddv driver is used to recognize the
ETERNUS DX's logical units.
Label the LUNs using the "format" command.
•
"Chapter 8 Setting Up the Server to Recognize
the Logical Units" (page 37)
Have the server recognize the ETERNUS DX
•
LUNs.
"FUJITSU Storage ETERNUS DX Configuration
-
Guide -Server Connection- (Fibre Channel)
for Oracle Solaris Driver Settings for Non-Fu-
jitsu Fibre Channel Cards"
When VxVM is used
When VxVM is not used
Setting Up VxVM
Install and set up VxVM when VxVM is used.
"3.5 VxVM Notes" (page 28)
•
•
"Chapter 9 Setting the Multipaths" (page 38)
Installing and setting up the VERITAS Volume
•
Manager
VxVM product documentation
-
•
Checking the supported version and use envi-
ronment
"Server Support Matrix"
-
Jump to Step 7
Creating Volume
P3AM-3702-16ENZ0