Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 27

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 32 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (31 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Pagina afdrukken
Fujitsu ETERNUS DX Disk Configuratiehandleiding
Chapter 8
Setting Up XenServer
8.5
Setting the Multipaths
The parameter for "product" varies depending on the model to be used as detailed in the following
table:
ETERNUS DX/AF to be connected
ETERNUS DX60 S4/DX100 S4/DX200 S4,
ETERNUS DX60 S3/DX100 S3/DX200 S3,
ETERNUS AF250 S2,
ETERNUS AF250,
ETERNUS DX200F
ETERNUS DX500 S4/DX600 S4,
ETERNUS DX500 S3/DX600 S3,
ETERNUS AF650 S2,
ETERNUS AF650
•
For XenServer versions 6.2.x to 6.5.x
Delete the "#" marks from the beginning of the following default definition in the "/etc/multi-
path.conf" file and enable the definition.
For the ETERNUS DX500 S4/DX600 S4, the ETERNUS DX500 S3/DX600 S3, the ETERNUS DX8700 S3/
DX8900 S3, the ETERNUS AF650 S2, or the ETERNUS AF650, add an "|M|H" in the "product" line as
shown below.
#
#
#
#
#
#
#
#
#
#
#
#
#
#
#
Delete these "#" marks
For XenServer versions 6.0.x to 6.1.x
•
Define the settings as shown below.
device {
*1: Add these lines if they are missing.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for Citrix
device {
vendor
product
getuid_callout
features
hardware_handler
path_selector
path_grouping_policy
failback
rr_weight
no_path_retry
rr_min_io
path_checker
prio
}
vendor
"FUJITSU"
product
"ETERNUS_DXL|ETERNUS_DX400|ETERNUS_DX8000|ETERNUS_DXM|ETERNUS_DXH"
prio_callout
"/sbin/mpath_prio_alua %d"
path_grouping_policy
group_by_prio
path_selector
"round-robin 0"
failback
immediate
path_checker
tur
no_path_retry
10
}
Copyright 2017 FUJITSU LIMITED
"product" value
ETERNUS_DXL
ETERNUS_DXM
"FUJITSU"
"ETERNUS_DX(L|400|8000|M|H)"
"/sbin/scsi_id -g -u -s /block/%n"
"1 queue_if_no_path"
"0"
"round-robin 0"
group_by_prio
immediate
uniform
10
1000
tur
alua
(*1)
27
Add "|M|H"
®
®
XenServer
P3AM-4572-19ENZ0