Fujitsu ETERNUS DX Disk Configuratiehandleiding - Pagina 18

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX Disk. Fujitsu ETERNUS DX Disk 31 pagina's. Server connection, fcoe for linux driver settings for converged network adapter cards
Ook voor Fujitsu ETERNUS DX Disk: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (44 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (29 pagina's), Configuratiehandleiding (25 pagina's), Configuratiehandleiding (32 pagina's), Configuratiehandleiding (35 pagina's), Configuratiehandleiding (43 pagina's), Configuratiehandleiding (21 pagina's), Configuratiehandleiding (24 pagina's)

Fujitsu ETERNUS DX Disk Configuratiehandleiding
Chapter 5
Setting Up the SAS Switches
The following describes the required settings when connecting the server and the ETERNUS DX storage sys-
tems using a SAS switch. For details, refer to the SAS switch manual.
The following examples show configurations in which a server is connected to a SAS switch with zoning.
The following example shows a configuration in which multiple servers are connected to multiple CAs.
ZONE1
Port0
Port1
Name : Server#1
Port0
Port1
ZONE2
Port2
Port4
Port6
SAS switch
Port3
Port5
Port7
Port0
Port1
CM0
ETERNUS DX
Name : RAID#1
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (SAS) for Windows
Copyright 2020 FUJITSU LIMITED
Name : Server#2
Port0
ZONE3
Port0
Port2
SAS switch
Port1
Port3
Port0
Port1
CM1
18
Port1
ZONE4
Port4
Port6
Port5
Port7
®
P3AM-3442-18ENZ0