Fujitsu ETERNUS DX S3 Series Configuratiehandleiding - Pagina 9
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX S3 Series. Fujitsu ETERNUS DX S3 Series 16 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu ETERNUS DX S3 Series: Configuratiehandleiding (38 pagina's), Veiligheidsmaatregelen (12 pagina's)
Pagina afdrukken
Chapter 2
Setting Up the ETERNUS DX/AF
2.1
Common Settings
For each connection configuration, set the indicated items only. All other parameters should be left on their
default values.
Table 2.3 FC port parameter settings (when the connection type is FC-AL)
Parameter
Connection
Set Loop ID
Loop ID
Transfer Rate
Frame Size
Reset Scope
Release Reservation if Chip is Reset
Table 2.4 FC port parameter settings (when the connection type is Fabric)
Parameter
Connection
Transfer Rate
Frame Size
Reset Scope
Release Reservation if Chip is Reset
Make sure to prepare and set up Fibre Channel switches for Fibre Channel connections. For setting details,
refer to "Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel Switch Settings" or "Fabric
OS Administrator's Guide Supporting Fabric OS".
2.1.2
Creating the Server Accessible LUN Groups (Setting the LUN Groups)
Create LUN groups for the server to access. Refer to "Connectivity Management" in "ETERNUS Web GUI User's
Guide" for details, and set the LUN groups.
Depending on the OS version, the server may not recognize the ETERNUS DX/AF unless a LUN group is as-
signed from LUN0. In this case, assign a LUN group starting from LUN0 in ascending order.
Solaris OS
FC-AL
Manual
Values from 0x10 upwards
(Except 0x7D)
Transfer rate that is selected in
2048
I_T_L
Disable
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection-
Copyright 2017 FUJITSU LIMITED
HP-UX, AIX, Windows
ESX, PAN Manager, Citrix XenServer,
Oracle Linux, Oracle VM Server for x86
0x00
Table
2.1.
Setting value
Fabric
Transfer rate that is selected in
2048
I_T_L
Disable
9
®
, Linux, VMware
Table 2.1
or
Table
2.2.
P3AM-7962-15ENZ0