Fujitsu ETERNUS DX200 S3 Installatiehandleiding - Pagina 10

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX200 S3. Fujitsu ETERNUS DX200 S3 15 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu ETERNUS DX200 S3: Configuratiehandleiding Serververbinding (12 pagina's), Configuratiehandleiding Serververbinding (12 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (13 pagina's), Configuratiehandleiding (18 pagina's), Veiligheidsmaatregelen (12 pagina's)

Establishing a Connection between the ETERNUS DX and the Operation Management LAN

Remove the LAN cable between the RMT port on Controller 0 and the PC terminal.

Connect the LAN cables of the MNT ports on Controller 0 and Controller 1 to the network of the customer.

Then start the web browser from the PC terminal that is connected to the network and log in to ETERNUS Web GUI

again with the IP address that is set in the Setup Network Environment settings. After login, the Overview screen

appears.

Firewall Settings

Set the firewall for each service.

Click the [System] tab, click [Network] in [Category],

and then click [Setup Firewall] in [Action].

Enable or disable each service.

If the network environment for the MNT

IMPORTANT

port is not set up, some functions will be

unusable. Make sure to set up the network

environment.

FUJITSU Storage ETERNUS DX100 S3/DX200 S3 Hybrid Storage Systems Setup Guide

P3AM-7852-06ENZ0