Fujitsu Eternus DX440 S2 Gebruikershandleiding - Pagina 26
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu Eternus DX440 S2. Fujitsu Eternus DX440 S2 42 pagina's. Disk storage system settings
Ook voor Fujitsu Eternus DX440 S2: Gebruikershandleiding (35 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's)
Pagina afdrukken
Chapter 6
Setting Up the VMware ESX Server
6.1
For VMware vSphere
4
Execute the following command in the terminal:
esxcli corestorage claimrule run
5
Check that the connected ETERNUS DX Disk storage system is shown when the appropriate command is
executed in the terminal:
Command
esxcli nmp satp listrules --satp VMW_SATP_ALUA
Display result
When connecting to an ETERNUS DX60/DX60 S2, DX80/DX80 S2, or DX90 S2
•
VMW_SATP_ALUA FUJITSU ETERNUS_DXL tpgs_on ETERNUS_DXL with ALUA
When connecting to an ETERNUS DX400/DX400 S2 series
•
VMW_SATP_ALUA FUJITSU ETERNUS_DX400 tpgs_on ETERNUS_DX400 with ALUA
•
When connecting to an ETERNUS DX8000/DX8000 S2 series
VMW_SATP_ALUA FUJITSU ETERNUS_DX8000 tpgs_on ETERNUS_DX8000 with ALUA
6
Log out of the terminal, and restart the VMware ESX server.
Refer to the following for details of the above commands:
Reference URL:
•
http://www.vmware.com/support/pubs/
Reference documents:
•
"vSphere Command-Line Interface Concepts and Examples"
ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware
26
Copyright 2013 FUJITSU LIMITED
®
ESX
P3AM-3412-13ENZ0