Fujitsu ETERNUS DX60 Configuratiehandleiding - Pagina 7

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX60. Fujitsu ETERNUS DX60 16 pagina's. Disk storage system
Ook voor Fujitsu ETERNUS DX60: Installatiehandleiding (4 pagina's), Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Installatiehandleiding (4 pagina's), Optionele producten gebruiken (2 pagina's), Configuratiehandleiding (28 pagina's), Optionele producten gebruiken (2 pagina's), Product Introductie (19 pagina's), Inhoud verpakking (4 pagina's), Handmatig (4 pagina's)

Chapter 1

Workflow

Setting the Affinity Groups

Set the server accessible LUN groups.

"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)

•

Setting the Host Affinity

Define the relationship between the registered Host Affinity and the FC host.

"2.1.4 Creating and Allocating LUN Groups (Setting Host Affinity Groups)" (page 12)

•

Setting the Reset Groups

Assign the ports of the ETERNUS DX to the same reset group, depending on the connection conditions.

•

"2.2.1 Setting the Reset Groups" (page 13)

Setting the Subsystem Parameters (for HP-UX only)

Set whether to enable [Disable Load Balance], a function that restricts retry-required sense responses

when the ETERNUS DX is in overload.

•

"2.2.2 Setting the Subsystem Parameters (for HP-UX only)" (page 14)

Checking the WWNs

Check information that is necessary for connecting to the server.

"2.3 Checking the WWNs" (page 14)

•

After completing all the required procedures in this manual, follow the procedures in "FUJITSU Storage

ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for each OS.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

P3AM-3182-15ENZ0