Fujitsu ETERNUS DX60 S2 Gebruikershandleiding - Pagina 35

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 42 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu ETERNUS DX60 S2: Gebruikershandleiding (35 pagina's), Configuratiehandleiding (28 pagina's), Gebruikershandleiding (14 pagina's), Configuratiehandleiding (16 pagina's), Configuratiehandleiding (38 pagina's), Installatiehandleiding voor hardware en software (36 pagina's)

Chapter 6

Setting Up the VMware ESX Server

6.2

For VMware Infrastructure 3

Confirm that the IP address for the iSCSI port of the ETERNUS DX Disk storage system is displayed as

follows and click [Close].

If the connected ETERNUS DX Disk storage system uses multiple iSCSI ports, repeat the IP address addi-

tion process for each iSCSI port. (Repeat

6.2.5

Setting CHAP Authentication

For VMware ESX connections, the ETERNUS DX Disk storage system uses a one-way CHAP authentication to

authenticate the Software Initiator access.

Perform the following settings to enable CHAP authentication.

Select the [Configuration] tab on VMware Infrastructure Client and select [Storage Adapters].

Select the target iSCSI Software Adapter and click [Properties].

Select the [CHAP Authentication] tab and click [Configure].

Select the [Use the following CHAP credentials] radio button.

Set arbitrary user name during the CHAP authentication.

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

Step 7

through

Step

9.)

ESX

P3AM-3412-13ENZ0