Fujitsu ETERNUS DX60 S2 Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 14 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu ETERNUS DX60 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (16 pagina's), Configuratiehandleiding (38 pagina's), Installatiehandleiding voor hardware en software (36 pagina's)

Pagina afdrukken
Fujitsu ETERNUS DX60 S2 Gebruikershandleiding

Package Contents

Check the list of package contents for the purchased product to confirm that no items are missing. Tick off the checkbox
of each confirmed item.
If there is a missing item, contact your sales representative.
Store the package contents in a safe and secure location, as they may be needed again when making changes to the
●
system or reinstalling the software.
Note that the package may sometimes also contain an Errata sheet and/or other such unlisted documentation.
●
ETERNUS DX60 S2 (2.5inch) (Product ID: ET062
ETERNUS DX60 S2 (3.5inch) (Product ID: ET062
□ Controller enclosure (x 1)
Drives that are purchased at the same time as the ETERNUS DX
Disk storage system are preinstalled according to the installation
rules.
●
2.5inch
●
3.5inch
□ Cover (x 1)
●
2.5inch
Flange cover
□ Rack rail kit
□ Rack rail (x 1 set)
□ M5 screw (x 8)
for attaching the rack rails
*1: An alphanumerical character is used for
D : dual-controller type
S : single-controller type
An alphanumerical character is used for
F : FC
L : iSCSI
S : SAS
An alphanumerical character may also be used for
FUJITSU Storage ETERNUS DX60 S2 Disk storage system Read Me First
●
3.5inch
Front cover
□ Screw holder (x 8)
Used when the rack pillars
have square holes.
a
to indicate the ETERNUS DX Disk storage system model.
b
to indicate the host interface type.
c
Copyright 2014 FUJITSU LIMITED
(*1)
C
U
)
a
b c
(*1)
D
U
)
a
b c
□ AC200V cable (x 2) IEC60320-C13↔NEMA L6-15P (4m)
□ Pin (x 1)
Used to adjust the Controller Enclosure's AUTO POWER
dip-switch.
□ Network Settings label (x 1)
□ Read Me First (this document) (x 1)
□ Safety Precautions (x 1)
□ Documentation CD (x 1)
depending on the purchased product.
3
P3AM-5542-07EN