Fujitsu ETERNUS DX60 S2 Configuratiehandleiding - Pagina 3

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX60 S2. Fujitsu ETERNUS DX60 S2 16 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu ETERNUS DX60 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Configuratiehandleiding (28 pagina's), Gebruikershandleiding (14 pagina's), Configuratiehandleiding (38 pagina's), Installatiehandleiding voor hardware en software (36 pagina's)

This manual briefly explains the operations that need to be performed by the user in order to connect an

ETERNUS DX to a server running Solaris OS, HP-UX, AIX, Windows

Citrix

XenServer

This manual should be used in conjunction with any other applicable user manuals, such as those for the

ETERNUS DX, server, OS, Fibre Channel Card, Converged Network Adapter cards, and drivers.

Refer to "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- Notations" for the notations

used in this manual such as product trademarks and product names. For storage systems that are supported

by the OS, refer to the Server Support Matrix of the ETERNUS DX.

The Contents and Structure of this Manual

This manual is composed of the following two chapters.

"Chapter 1 Workflow" (page 6)

•

This chapter describes the workflow when setting up an ETERNUS DX.

"Chapter 2 Setting Up the ETERNUS DX" (page 8)

•

This chapter describes how to set up an ETERNUS DX.

, Oracle Linux, or Oracle VM Server via a Fibre Channel interface.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

, Linux, VMware ESX, Egenera BladeFrame,

Preface

15th Edition

June 2015

P3AM-3182-15ENZ0