Fujitsu Eternus DX600 S3 Configuratiehandleiding - Pagina 7

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu Eternus DX600 S3. Fujitsu Eternus DX600 S3 18 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu Eternus DX600 S3: Configuratiehandleiding Serververbinding (12 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (13 pagina's), Veiligheidsmaatregelen (12 pagina's)

FUJITSU Storage ETERNUS AF series and ETERNUS DX S4/S3 series

2. System Configuration

Non-stop storage systems use the transparent failover feature of Storage Cluster.

The system is configured with two ETERNUS AF/DX storage systems, the business servers, the Fibre Channel switches, and the management

servers running ETERNUS SF products.

This chapter describes the following aspects of the non-stop storage system configuration.

2.1. Example of a Non-Stop Storage Configuration

Describes a redundant configuration for business environments as a basic configuration of non-stop storage systems.

The configuration uses two ETERNUS DX200 S4 storage systems.

The management server is virtually configured in a single physical server.

2.2. Example of a Non-Stop Storage Configuration (with Redundant Management Servers)

Describes a configuration that improves the availability of non-stop storage operation and monitoring.

The configuration uses two physical servers for the management servers and uses WSFC to make them redundant.

2.3. Hardware Layout

Describes a hardware layout chosen to facilitate a response to problems at installation sites or during disasters.

2.4. Workflow for System Configuration

Describes the sequence of steps for setting up the non-stop storage system.

Page 7 of 18

http://www.fujitsu.com/eternus/