AEG OKO-LAVAMAT 72600 update Gebruiksaanwijzing - Pagina 34
Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG OKO-LAVAMAT 72600 update. AEG OKO-LAVAMAT 72600 update 44 pagina's. The environmentally friendly washing machine
Pagina afdrukken
Troubleshooting
Fault
Washing has not been
spun sufficiently, there
is water left in the
drum.
Error code (2 appears.
The door cannot be
opened with the
machine on.
The rinse water is
cloudy.
When pressing a
program option button
the corresponding
display does not light
up.
Washing powder
residues are left in the
washing powder
compartment.
34
Possible cause
There is a kink in the outlet
hose.
Maximum pumping height
(drain height 1m from the
position of the machine) is
exceeded.
Drain pump is blocked.
The water drainage system is
blocked.
The door is locked due to
safety reasons (DOOR display
is off).
Probably caused by a
washing powder with a high
silicate content.
The program option selected
is not available with the
program set.
The water tap is not fully
open.
The inlet hose filter is
blocked.
The inlet valve filter is
blocked.
Remedy
Eliminate the kink.
Please contact AEG Service
Force Centre, it has a retro-
kit available for pump
heights above 1m.
Switch off the machine and
pull the plug out of the
socket, clean the drain pump.
Clean the blockage.
Wait until the DOOR display
is green.
This does not affect the
rinse results. If necessary use
liquid detergent.
Make another selection.
Open the water tap fully.
Clean the filter.
Disconnect the inlet hose
from the machine and clean
filter.