Fujitsu ETERNUS DX80 Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ETERNUS DX80. Fujitsu ETERNUS DX80 42 pagina's. Disk storage system
Ook voor Fujitsu ETERNUS DX80: Installatiehandleiding (4 pagina's), Gebruikershandleiding (35 pagina's), Installatiehandleiding (4 pagina's), Optionele producten gebruiken (2 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (16 pagina's), Optionele producten gebruiken (2 pagina's), Product Introductie (19 pagina's), Inhoud verpakking (4 pagina's), Handmatig (4 pagina's)

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

6.1.3

Creating the Virtual Switches

Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.

Perform the following procedure to each vmnic that configures iSCSI SAN.

Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-

work] in the upper right of the window.

Select [VMkernel] and click the [Next] button.

Select the checkbox of the target network adapter and click the [Next] button.

Set properties of port groups as required, and click the [Next] button.

Set the IP address and subnet mask of "VMkernel", and click the [Next] button.

Repeat

Step 1

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

through

Step 5

to add another virtual switch (vSwitch2).

ESX

P3AM-3412-13ENZ0