Fujitsu ETERNUS DX80 Configuratiehandleiding - Pagina 22

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX80. Fujitsu ETERNUS DX80 28 pagina's. Disk storage system
Ook voor Fujitsu ETERNUS DX80: Installatiehandleiding (4 pagina's), Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Installatiehandleiding (4 pagina's), Optionele producten gebruiken (2 pagina's), Configuratiehandleiding (16 pagina's), Optionele producten gebruiken (2 pagina's), Product Introductie (19 pagina's), Inhoud verpakking (4 pagina's), Handmatig (4 pagina's)

Chapter 7

Checking Connections

7.1

To turn on the connected devices, use the following procedure:

Turn on any devices (such as LAN switches) on the LAN path between the ETERNUS DX and server.

After checking that the Ready (or equivalent) LED of the LAN switch is lit, turn on the ETERNUS DX

storage systems.

After checking that the ETERNUS DX's Ready LED is lit, turn on the server.

7.2

Make the server recognize the logical units (LUN) set in the ETERNUS DX storage systems.

Use the "ioscan" command to check which devices are connected.

Enter as follows for LegacyView (old format) results:

# ioscan -fn

Enter as follows for AgileView (HP-UX11iv3 and newer format) results:

# ioscan -fnN

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (iSCSI) for HP-UX

P3AM-3402-14ENZ0