Fujitsu Eternus DX80 S2 Gebruikershandleiding - Pagina 22

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 42 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX80 S2: Gebruikershandleiding (35 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's), Configuratiehandleiding (38 pagina's)

Chapter 6

Setting Up the VMware ESX Server

6.1

For VMware vSphere

6.1.3

Creating the Virtual Switches

Add two virtual switches (vSwitch) for iSCSI to VMware ESX. Add a "VMkernel" and "vmnic" for each vSwitch.

Perform the following procedure to each vmnic that configures iSCSI SAN.

Open the network window by selecting the [Configuration] tab on vSphere Client and click [Add Net-

work] in the upper right of the window.

Select [VMkernel] and click the [Next] button.

Select the checkbox of the target network adapter and click the [Next] button.

Set properties of port groups as required, and click the [Next] button.

Set the IP address and subnet mask of "VMkernel", and click the [Next] button.

Repeat

Step 1

ETERNUS DX Disk storage systems User's Guide -Server Connection-(iSCSI) for VMware

through

Step 5

to add another virtual switch (vSwitch2).

ESX

P3AM-3412-13ENZ0