Fujitsu Eternus DX80 S2 Configuratiehandleiding - Pagina 31

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 38 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX80 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's)

Chapter 11

Creating the Volumes

11.2

Creating the Logical Volumes

The [Add a Logical Volume] window will appear.

Specify the following items.

Specify any name for the [Logical volume NAME].

•

Specify the [Number of LOGICAL PARTITIONS], according to the following formula.

•

Logical volume capacity = logical partition size ´ number of logical partitions

Also, when creating a file system, a Journal Log is also created on the same disk, so be sure to leave

at least one logical partition in the Volume Group.

Regarding [Enable BAD BLOCK relocation?], be sure to specify "no".

•

After the settings are complete, exit the "smit" command.

Check the contents of the created logical volume.

If the logical volume name is "raid_lv6", execute the command as follows:

# lslv raid_lv6

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

P3AM-3782-23ENZ0