Fujitsu Eternus DX80 S2 Configuratiehandleiding - Pagina 8

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu Eternus DX80 S2. Fujitsu Eternus DX80 S2 38 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX80 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's)

Chapter 1

Workflow

Setting Up the Fibre Channel Switches

If a Fibre Channel switch is to be used, set it up now.

"Chapter 7 Setting Up the Fibre Channel Switches" (page 19)

•

Checking the Fibre Channel switch connection requirements

•

"Server Support Matrix for FC-SWITCH"

Installing the Fibre Channel Card Drivers and Setting the Parameters

Install the Fibre Channel card drivers, and set up the server environment.

•

"8.1 Installing the Driver" (page 21)

"8.2 Setting Up the Driver Parameters" (page 21)

•

Checking the Fibre Channel card driver versions

•

"Server Support Matrix"

For the standard multipath driver or the ETERNUS

Installing the Multipath Driver

Install the ETERNUS Multipath Driver before using

it.

"8.3 Installing the Multipath Driver" (page 23)

•

Installing the Multipath Driver

•

Installation & Configuration Guide

Setting Up the Server to Recognize the Logical Units

Set up the server so that it can recognize the LUNs (logical unit numbers) of the ETERNUS DX/AF.

"9.2 Setting Up the Server to Recognize the Logical Units" (page 25)

•

FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX

Multipath Driver

For single-path connection or Veritas Volume

Manager

Installing the FJspio Package

Install the FJspio.

"8.4 Installing the FJspio Package" (page 23)

•

P3AM-3782-23ENZ0