Fujitsu ETERNUS DX8000 series Configuratiehandleiding - Pagina 15

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX8000 series. Fujitsu ETERNUS DX8000 series 17 pagina's.

Chapter 2 ETERNUS DX Connection Settings

2.2 OS Specific Settings

Example: When multiple ESX servers share ETERNUS DX LUNs, CM#0 Port#1 and CM#1 Port#1 must be assigned to

2.2.2

Setting the Sub System Parameters (for HP-UX only)

For HP-UX connection, clear the [Disable Load Balance] checkbox in the "Set Sub System Parameters" screen.

For HP-UX server, improper logs may be recorded unless sense response is restricted. Therefore, [Disable

Load Balance] should be disabled. (Sense response should be restricted.)

Note that changing the [Disable Load Balance] setting does not affect on non-HP-UX servers.

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

the same reset group, even for single-path configurations.

Server#1

HBA#1

LAN switch#1

CM#0

Port#1

Affinity-Group

Server#2

HBA#1

LAN switch#2

CM#1

Port#1

P3AM-3972-08ENZ0