Fujitsu ETERNUS DX8900 S3 Configuratiehandleiding - Pagina 6
Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu ETERNUS DX8900 S3. Fujitsu ETERNUS DX8900 S3 13 pagina's. Hybrid storage systems, all-flash arrays, power synchronized unit
Ook voor Fujitsu ETERNUS DX8900 S3: Configuratiehandleiding (18 pagina's), Veiligheidsmaatregelen (12 pagina's)
Chapter 1
Workflow
This manual is used when performing the setup procedures described in the "Setting Up the ETERNUS DX"
section of the "FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel)" for
each OS.
Required Documents
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) Fibre Channel
•
Switch Settings"
"Fabric OS Administrator's Guide Supporting Fabric OS"
•
"FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection- (Fibre Channel) for Oracle Solaris"
•
•
"ETERNUS Web GUI User's Guide"
Workflow
Setting the FC Port Parameters
Set the to-server connection type.
"2.1.1 Setting the To-Server Connection Type (Setting the FC Port Parameters)" (page 8)
•
Setting the LUN Groups
Set the server accessible LUN groups.
•
"2.1.2 Creating the Server Accessible LUN Groups (Setting the LUN Groups)" (page 9)
Setting the Host Responses
Set the host responses to match the connection configuration.
"2.1.3 Setting the Host Responses" (page 10)
•
6
FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-
Copyright 2015 FUJITSU LIMITED
P3AM-7962-08ENZ0