Fujitsu Eternus DX90 Configuratiehandleiding - Pagina 13

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu Eternus DX90. Fujitsu Eternus DX90 16 pagina's. Disk storage system
Ook voor Fujitsu Eternus DX90: Gebruikershandleiding (35 pagina's), Optionele producten gebruiken (2 pagina's)

Pagina afdrukken

Fujitsu Eternus DX90 Configuratiehandleiding

1. Setting the To-Server Connection Type (Setting the Fc Port Parameters)

Chapter 2

Setting Up the ETERNUS DX

2.2

Specific Settings

2.2

Specific Settings

Some settings are not required for some OSes and/or connection configurations.

Check the various cases described below, and perform any required settings.

2.2.1

Setting the Reset Groups

If the system configuration matches any of the items "System configuration that requires the reset group set-

ting" in the following table, every ETERNUS DX port that connects to the given server's access paths must be

assigned to the same reset group.

For system configurations other than the following, use the default settings.

Solaris OS

AIX

Windows Server

VMware vSphere (ESXi 5.5, ESXi 5.1, ES-

Xi 5.0, ESX 4.1, ESXi 4.1, ESX 4.0, ESXi

4.0)

VMware Infrastructure 3 (ESX 3.5, ESXi

3.5)

*1: For a Windows Server

2008 based WSFC configuration, the reset group settings are not necessary.

System configuration that requires the reset group setting

Cluster configuration

Single path configuration using FJspio for a PowerHA or HACMP cluster

MSCS configuration (*1)

2003

Multipath configuration

Multiple ESX servers share ETERNUS DX LUNs (*2)

2012 R2, Windows Server

FUJITSU Storage ETERNUS DX Configuration Guide -Server Connection-

2012, Windows Server

2008 R2, or Windows Server

P3AM-3182-15ENZ0