Fujitsu Eternus DX90 S2 Configuratiehandleiding - Pagina 32

Blader online of download pdf Configuratiehandleiding voor {categorie_naam} Fujitsu Eternus DX90 S2. Fujitsu Eternus DX90 S2 38 pagina's. Server connection. (fibre channel) for aix
Ook voor Fujitsu Eternus DX90 S2: Gebruikershandleiding (35 pagina's), Gebruikershandleiding (42 pagina's), Handmatig (18 pagina's), Installeer setup (20 pagina's), Configuratiehandleiding Serververbinding (13 pagina's), Hardware-installatie (23 pagina's), Configuratiehandleiding (28 pagina's), Configuratiehandleiding (15 pagina's)

Pagina afdrukken
Fujitsu Eternus DX90 S2 Configuratiehandleiding
Chapter 11
Creating the Volumes
11.2
Creating the Logical Volumes
7
Check that the [BB POLICY:] parameter is shown as "non-relocatable".
If not, re-execute the "smit" command and try again.
LOGICAL VOLUME:
LV IDENTIFIER:
VG STATE:
TYPE:
MAX LPs:
COPIES:
LPs:
STALE PPs:
INTER-POLICY:
INTRA-POLICY:
MOUNT POINT:
MIRROR WRITE CONSISTENCY: on
EACH LP COPY ON A SEPARATE PV ?: yes
Execute this command for all logical volumes created on ETERNUS DX/AF storage systems' LUNs to
disable [Bad Block Relocation].
If [Redistribution of bad blocks] is not disabled, file system may be damaged.
FUJITSU Storage ETERNUS DX, ETERNUS AF Configuration Guide -Server Connection- (Fibre Channel) for AIX
raid_lv6
000972ca57abbe2b.l
active/complete
jfs
512
1
500
0
minimum
middle
/mnt/raid_lv6
32
Copyright 2018 FUJITSU LIMITED
VOLUME GROUP:
raid_vg6
PERMISSION:
read/write
LV STATE:
opened/syncd
WRITE VERIFY:
off
PP SIZE:
4 megabyte(s)
SCHED POLICY:
parallel
PPs:
500
BB POLICY:
non-relocatable
RELOCATABLE:
yes
UPPER BOUND:
32
LABEL:
/mnt/raid_lv6
P3AM-3782-23ENZ0