Fujitsu ETERNUS2000 200 Aansluithandleiding - Pagina 12

Blader online of download pdf Aansluithandleiding voor {categorie_naam} Fujitsu ETERNUS2000 200. Fujitsu ETERNUS2000 200 19 pagina's. Disk storage systems (fibre channel) for oracle solaris
Ook voor Fujitsu ETERNUS2000 200: Handmatig (28 pagina's), Handmatig (21 pagina's), Handleiding serververbinding (25 pagina's), Handleiding serververbinding (32 pagina's), Installatiehandleiding (4 pagina's), Optionele producten gebruiken (2 pagina's)

Chapter 3 Setting Up the Server

3.2 Setting Up Brocade Fibre Channel Cards

3.2

Setting Up Brocade Fibre Channel Cards

Brocade Command line Utility (BCU) is bundled with the Brocade Fibre Channel card driver.

Use the "bcu" command to check the port ID and to set the port speed, topology, and frame data

size.

•

Port ID

Use the information obtained in

Server" (page 9)

Port ID check command

bcu port -- list

•

Port speed

Specify the port speed value according to the table below.

"bcu" command format

bcu port --speed <port_id> [ 1|2|4|8|10|auto]

8Gbps

4Gbps

•

Topology

Set the topology value to "p2p".

"bcu" command format

bcu port --topology <port_id> [auto | p2p]

•

Frame data size

Set the frame data size value to "2048".

"bcu" command format

bcu port --dfsize <port_id> [<dfsize>]

P3AM-4562-01ENZ0

ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris

to check the port ID.

Fibre Channel switch transfer speed

Fibre Channel card

transfer speed

8Gbps

"3.1 Creating a WWN Instance Management Table for the

4Gbps

2Gbps