Fujitsu ETERNUS4000 model 300 Aansluithandleiding - Pagina 11
Blader online of download pdf Aansluithandleiding voor {categorie_naam} Fujitsu ETERNUS4000 model 300. Fujitsu ETERNUS4000 model 300 19 pagina's. Disk storage systems (fibre channel) for oracle solaris
Ook voor Fujitsu ETERNUS4000 model 300: Handmatig (28 pagina's), Handleiding serververbinding (25 pagina's), Handleiding serververbinding (32 pagina's)
Chapter 3 Setting Up the Server
>
3.1 Creating a WWN Instance Management Table for the Server
4-2
5
6
6-1
7
This completes the "WWN instance management table for the server".
P3AM-4562-01ENZ0
ETERNUS Disk storage systems Server Connection Guide for Oracle Solaris
Use the following command to check the WWN of the Fibre Channel card that
corresponds to the physical path name. The result is displayed in the same order as
shown in
Step
4-1.
# prtpicl -v -c scsi-fcp | grep port-wwn
Example
# prtpicl -v -c scsi-fcp | grep port-wwn
:bfa0-port-wwn
:bfa1-port-wwn
Add the results in the "WWN instance management table for the server".
Example
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
Check the controller number of the target connected to the Fibre Channel card.
Use the following command to check the controller number of the target connected to
the Fibre Channel card. The controller number corresponds to the physical path dis-
played in
Step
4-1.
# cfgadm -v
Example
Ap_Id
Receptacle
When
Type
c2
connected
unavailable
fc-fabric
c3
connected
unavailable
fc-fabric
Add the results in the "WWN instance management table for the server"
Physical slot name
WWN
PCIE1
100000051ee7457b
PCIE2
100000051ee7457c
10:00:00:05:1e:e7:45:7b
10:00:00:05:1e:e7:45:7c
Controller
Instance
name
name
bfa0
bfa1
Occupant
Condition
Busy
phys_ID
configured
unknown
n
/devices/pci@7c0/pci@0/pci@8/bfa@0/fp@0,0:fc
configured
unknown
n
/devices/pci@7c0/pci@0/pci@8/bfa@0,1/fp@0,0:fc
Instance
Controller
name
name
C2
bfa0
bfa1
C3
11
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
Information
.
Physical path name
/pci@7c0/pci@0/pci@8/bfa@0
/pci@7c0/pci@0/pci@8/bfa@0,1
End of procedure
Copyright 2010 FUJITSU LIMITED