Fujitsu ETERNUS8000 800 Handleiding serververbinding - Pagina 13

Blader online of download pdf Handleiding serververbinding voor {categorie_naam} Fujitsu ETERNUS8000 800. Fujitsu ETERNUS8000 800 25 pagina's. Disk storage systems (fibre channel) for oracle solaris
Ook voor Fujitsu ETERNUS8000 800: Handmatig (28 pagina's), Handmatig (21 pagina's), Handleiding serververbinding (32 pagina's), Aansluithandleiding (19 pagina's)

Pagina afdrukken

Fujitsu ETERNUS8000 800 Handleiding serververbinding

Chapter 5

5.1

Preparation

5.1.1

Installing the "open-iscsi" package

Red Hat Package Manager (RPM) is used to set up the iSCSI environment in the Linux server.

Check that one of the following RPMs is installed. If not, install it.

For SLES10 SP2: open-iscsi-2.0.707-0.44.<Architecture name> or later

Installation execution example

# rpm -ivh open-iscsi-2.0.707-0.19.<Architecture_name>.rpm

5.1.2

Preparing the device-mapper multipath setup

Use the following Red Hat Package Manager (RPM) to set up the device-mapper multipaths. If

this RPM is not installed, install it.

device-mapper-1.02.03-8.2.<Architecture_name> or later

device-mapper-32bit-1.02.03-8.2.<Architecture_name> or later

multipath-tools-0.4.6-25.17.<Architecture_name> or later

Installation execution example

# rpm -ivh device-mapper-1.02.03-8.2.<Architecture_name> or later

P3AM-4152-02ENZ0

ETERNUS Disk storage systems Server Connection Guide (iSCSI) for Linux

(SUSE Linux Enterprise Server)

Setting Up the Linux Server