Brother MFC-8910DW Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} Brother MFC-8910DW. Brother MFC-8910DW 27 pagina's. Quick setup guide - english
Ook voor Brother MFC-8910DW: Handmatig (30 pagina's), Handmatig (36 pagina's), Netwerkhandleiding (29 pagina's), Handleiding voor snelle installatie (45 pagina's), Gebruikershandleiding (23 pagina's), Handleiding voor snelle installatie (45 pagina's), Handleiding productveiligheid (23 pagina's)

Configuration for Scan to FTP using a Web Browser

Configuring the Scan to FTP Default Settings

Start your web browser.

Type "http://machine's IP address/" into your browser's address bar (where "machine's IP address" is the

IP address of the machine or the print server name).



For example: http://192.168.1.2/

No password is required by default. If you have previously set a password, enter it and press

Click Scan.

Click Scan to FTP/Network Profile.

Choose the Profile you want to configure in Scan to FTP/Network Profile.

You can configure and change the following Scan to FTP settings.

1 Enter the name that you want to use for the profile of the FTP server. This name will be displayed on

the LCD of the machine and can be up to 15 characters.

2 The Host Address is the domain name of the FTP server. Enter the Host Address (for example

mypc.example.com) (up to 64 characters) or the IP address (for example 192.23.56.189).

3 Enter the Username and Password that has been registered with the FTP server for the machine (up

to 32 characters).

4 Enter the destination folder where your document will be stored on the FTP server (for example

brother\abc) (up to 60 characters).