AEG ABE818F6NS Gebruikershandleiding - Pagina 15

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG ABE818F6NS. AEG ABE818F6NS 36 pagina's.
Ook voor AEG ABE818F6NS: Installatie-instructie (12 pagina's)

Pagina afdrukken

Problem

The compressor does not

start immediately after

pressing the "Frostmatic", or

after changing the tempera‐

ture.

Door is misaligned or inter‐

feres with ventilation grill.

Door does not open easily.

There is too much frost and

ice.

Water flows on the floor.

Possible cause

Food products placed in the

appliance were too warm.

The door is not closed cor‐

rectly.

The Frostmatic function is

switched on.

The compressor starts after

a period of time.

The appliance is not level‐

led.

You attempted to re-open

the door immediately after

closing.

The door is not closed cor‐

rectly.

The gasket is deformed or

dirty.

Food products are not wrap‐

ped properly.

Temperature is set incorrect‐

ly.

Appliance is fully loaded and

is set to the lowest tempera‐

ture.

Temperature set in the appli‐

ance is too low and the am‐

bient temperature is too

high.

The melting water outlet is

not connected to the evapo‐

rative tray above the com‐

pressor.

ENGLISH

Solution

Allow food products to cool

to room temperature before

storing.

Refer to "Closing the door"

section.

Refer to "Frostmatic func‐

tion" section.

This is normal, no error has

occurred.

Refer to installation instruc‐

tions.

Wait a few seconds between

closing and re-opening of

the door.

Refer to "Closing the door"

section.

Refer to "Closing the door"

section.

Wrap the food products bet‐

ter.

Refer to "Control panel"

chapter.

Set a higher temperature.

Refer to "Control panel"

chapter.

Set a higher temperature.

Refer to "Control panel"

chapter.

Attach the melting water out‐

let to the evaporative tray.