Brother QL-580N Installatie- en bedieningshandleiding - Pagina 25

Blader online of download pdf Installatie- en bedieningshandleiding voor {categorie_naam} Brother QL-580N. Brother QL-580N 43 pagina's. Label printer
Ook voor Brother QL-580N: Gebruikershandleiding voor netwerken (42 pagina's), Gebruikershandleiding voor de software (40 pagina's), Gebruikershandleiding voor netwerken (48 pagina's), Gebruikershandleiding voor de software (48 pagina's), Gebruikershandleiding (26 pagina's), Gebruikershandleiding (40 pagina's), Gebruikershandleiding (41 pagina's)

2. When using Mac OS

This section explains how to install P-touch Editor 5.0, Fonts, Auto Format Templates,

Clip Art, and the printer driver. After the driver is installed the driver configuration is

explained.

•

Until the installation of printer driver is completed, do not connect the machine to

your Macintosh

Network interface cable from your Macintosh

•

When installing the machine, log in as the administrator.

The following is the example for Mac OS

QL-XXX. Read "XXX" as your printer name. The printer names in the following screens

may differ from your purchased printer name.

Start the Macintosh

Double click the "QL_Series" (CD-ROM) icon.

Click the [Mac OS X] folder and double click the [P-touch Editor 5.0

Installer].

Follow the on-screen instructions.

After the installation is completed and

the screen shown right is displayed,

click [Done].

The installation of the P-touch Editor 5.0 is

completed.

Next, install the printer driver.

Open [Brother QL-XXX Driver] in [Mac OS X] folder. Double

click [Brother QL-XXX Driver.pkg] in your OS name folder.

The Driver Installer starts up. Follow the on-screen instructions.

When the installation is completed and

the message "Click Restart to finish

installing the software" is displayed,

click [Restart].

The Macintosh

The installation of the printer driver is completed.

. If it has been connected to it, pull out the USB interface cable/

, and insert the CD-ROM into the CD-ROM drive.

is restarted.

X 10.4.9. In the following steps, you will see

STEP