Brother CP-2000 Gebruikershandleiding - Pagina 7

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother CP-2000. Brother CP-2000 33 pagina's. Copyboard
Ook voor Brother CP-2000: Gebruikershandleiding (19 pagina's), Brochure & specificaties (4 pagina's), Referentielijst onderdelen (18 pagina's)

Align the screws on the knobs with the holes in the brackets, and then

tighten each knob (one on each side).

While tightening each knob, it may be necessary to lift up the lower leg

slightly so that the screw on the knob correctly enters the hole in the

bracket.

Carefully lift up the copyboard to set it

up on its stand, and then spread the

legs completely.

To reduce the risk of the copyboard

falling down and causing injuries, do

not loosen the knobs on the stand

when the stand is in use.

Turn the adjuster on the end of each

back leg until the stand is stable.

To reduce the risk of the copyboard

falling down and causing injuries, be

careful that the copyboard does not

tip over.

2. Setup