Brother Inkjet MFC-J4710DW Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Brother Inkjet MFC-J4710DW. Brother Inkjet MFC-J4710DW 22 pagina's. Quick setup guide - spanish
Ook voor Brother Inkjet MFC-J4710DW: Handmatig (36 pagina's), Handleiding productveiligheid (17 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's), Handleiding voor snelle installatie (47 pagina's), Handleiding productveiligheid (20 pagina's), Specificaties (2 pagina's), Handleiding voor snelle installatie (47 pagina's), (Spaans) Handleiding voor Web Connect (38 pagina's), (Spaans) Handboek (24 pagina's), (Engels) Handleiding voor productveiligheid (16 pagina's), (Spaans) Handboek (12 pagina's), (Spaans) Handboek (11 pagina's), (Engels) Snelle configuratiegids (47 pagina's)

Brother Inkjet MFC-J4710DW Handmatig
1

Introduction

Overview

Wi-Fi Direct™ is one of the wireless configuration methods developed by the Wi-Fi Alliance
configure a secured wireless network between your Brother machine and a mobile device, such as an
Android™ device, Windows
Direct supports wireless network configuration using the one-push or PIN Method of Wi-Fi Protected Setup™
(WPS). You can also configure a wireless network by manually setting an SSID and password. Your Brother
machine's Wi-Fi Direct feature supports WPA2™ security with AES encryption.
1 Mobile device
2 Your Brother machine
NOTE
• Although the Brother machine can be used in both a wired and wireless network, only one connection
method can be used at a time. However, a wireless network connection and Wi-Fi Direct connection, or a
wired network connection and Wi-Fi Direct connection can be used at the same time.
• The Wi-Fi Direct supported device can become a Group Owner (G/O). When configuring the Wi-Fi Direct
network, the G/O serves as an access point (see Group Owner (G/O) on page 17).
• When your Brother machine is the G/O, your Brother machine supports one-to-one wireless
communication using Wi-Fi Direct.
• Ad-hoc mode and Wi-Fi Direct cannot be used at the same time. Disable one function to enable the other.
If you want to use Wi-Fi Direct while you are using Ad-hoc mode, set Network I/F to LAN or disable Ad-hoc
mode and connect your Brother machine to the access point.
®
Phone device, iPhone, iPod touch, or iPad, without using an access point. Wi-Fi
1
®
. It allows you to
2
1
1
1
1