Brother Inkjet MFC-J4710DW Handleiding voor snelle installatie - Pagina 2

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother Inkjet MFC-J4710DW. Brother Inkjet MFC-J4710DW 47 pagina's. Quick setup guide - spanish
Ook voor Brother Inkjet MFC-J4710DW: Handmatig (36 pagina's), Handmatig (22 pagina's), Handleiding productveiligheid (17 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's), Handleiding productveiligheid (20 pagina's), Specificaties (2 pagina's), Handleiding voor snelle installatie (47 pagina's), (Spaans) Handleiding voor Web Connect (38 pagina's), (Spaans) Handboek (24 pagina's), (Engels) Handleiding voor productveiligheid (16 pagina's), (Spaans) Handboek (12 pagina's), (Spaans) Handboek (11 pagina's), (Engels) Snelle configuratiegids (47 pagina's)

Pagina afdrukken
Brother Inkjet MFC-J4710DW Handleiding voor snelle installatie
a
Remove the protective tape and film covering
the machine, and also from the Touchscreen.
b
Make sure you have all the components.
2
Load plain Letter/A4
paper
CAUTION
DO NOT carry the machine by holding the scanner
cover, the Jam Clear Cover, the manual feed slot
cover, or the control panel. Doing this may cause
the machine to slip out of your hands. Carry the
machine by sliding your hands into the handhold
indentations located on each side of the machine.
For detailed information, see the Product Safety
Guide.
a
Pull the paper tray (for MFC-J4710DW, paper
tray #1, the upper tray) a, completely out of
the machine.
b
Open the output paper tray cover a.
1
2
c
Gently press and slide the paper guides a to fit
the paper size. Make sure that the triangular
mark b on the paper guide a lines up with the
mark for the paper size you are using.
d
Fan the stack of paper well to avoid paper jams
and misfeeds.
1
NOTE
Always make sure that the paper is not curled or
wrinkled.
1
2