Brother Inkjet MFC-J4710DW Handleiding voor snelle installatie - Pagina 45

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother Inkjet MFC-J4710DW. Brother Inkjet MFC-J4710DW 47 pagina's. Quick setup guide - spanish
Ook voor Brother Inkjet MFC-J4710DW: Handmatig (36 pagina's), Handmatig (22 pagina's), Handleiding productveiligheid (17 pagina's), Handmatig (13 pagina's), Handmatig (13 pagina's), Handleiding productveiligheid (20 pagina's), Specificaties (2 pagina's), Handleiding voor snelle installatie (47 pagina's), (Spaans) Handleiding voor Web Connect (38 pagina's), (Spaans) Handboek (24 pagina's), (Engels) Handleiding voor productveiligheid (16 pagina's), (Spaans) Handboek (12 pagina's), (Spaans) Handboek (11 pagina's), (Engels) Snelle configuratiegids (47 pagina's)

For Network Users

To restore all network settings of the internal Print/Scan server to the factory default, please follow the steps below.

Make sure the machine is idle, then disconnect all the cables from the machine (except the power cord).

Press

Press All Settings.

Press Network.

Swipe up or down, or press a or b to display Network Reset, and then press Network Reset.

Press Yes.

Hold down Yes for 2 seconds to confirm.

The machine will restart, re-connect the cables once this is complete.

Press

to cycle between lower case and upper case.

Press

to cycle between letters, numbers and special characters. (The characters available may differ

depending on your country.)

To move the cursor to the left or right, press d or c.

Inserting spaces

To enter a space, press Space.

Making corrections

If you entered a number or a character incorrectly and want to change it, move the cursor to the incorrect one.

Press

and then re-enter the correct one. You can also go back and insert a character.