AEG NSK6I82EF Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} AEG NSK6I82EF. AEG NSK6I82EF 16 pagina's.

Pagina afdrukken

– store raw meat and fish in suitable containers in the

refrigerator, so that it is not in contact with or drip onto

other food.

• WARNING: Keep ventilation openings, in the appliance

enclosure or in the built-in structure, clear of obstruction.

• WARNING: Do not use mechanical devices or other means

to accelerate the defrosting process, other than those

recommended by the manufacturer.

• WARNING: Do not damage the refrigerant circuit.

• WARNING: Do not use electrical appliances inside the food

storage compartments of the appliance, unless they are of

the type recommended by the manufacturer.

• Do not use water spray and steam to clean the appliance.

• Clean the appliance with a moist soft cloth. Only use neutral

detergents. Do not use abrasive products, abrasive

cleaning pads, solvents or metal objects.

• When the appliance is empty for long period, switch it off,

defrost, clean, dry and leave the door open to prevent

mould from developing within the appliance.

• Do not store explosive substances such as aerosol cans

with a flammable propellant in this appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its Authorised Service Centre or similarly

qualified persons in order to avoid a hazard.

2. SAFETY INSTRUCTIONS

2.1 Installation

WARNING!

Only a qualified person must install this

appliance.

• Remove all the packaging.

• Do not install or use a damaged

appliance.

• Do not use the appliance before installing

it in the built-in structure due to safety

manner.

• Follow the installation instructions supplied

with the appliance.

ENGLISH

• Always take care when moving the

appliance as it is heavy. Always use safety

gloves and enclosed footwear.

• Make sure the air can circulate around the

appliance.

• At first installation or after reversing the

door wait at least 4 hours before

connecting the appliance to the power

supply. This is to allow the oil to flow back

in the compressor.

• Before carrying out any operations on the

appliance (e.g. reversing the door),

remove the plug from the power socket.