AEG OKO SANTO SANTO Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} AEG OKO SANTO SANTO. AEG OKO SANTO SANTO 28 pagina's. Built-in refrigerators

Installation

lated without a plinth opening, however, the energy consumption may

differ from that specified in the brochure.

Important note! In order not to impair the function of the appliance,

never cover or obstruct the ventilation openings.

Installation

See installation instructions supplied.

Please check whether, after installing your appliance and especially

after rehingeing the door, the door seal seals right round. An untight

door seal may lead to heavy frosting and thereby to a higher power

consumption (see also „What to do if...").

Before initial start-up, refer to the appliance serial plate to ascertain if

supply voltage and current values correspond with those of the mains

at the installation location.

e.g.:

(i.e. 220 to 240 volts alternating current, 50 Hertz)

The rating plate is inside the appliance on the left.

A correctly installed, earthed socket is required for the electrical supply.

The supply must have a fuse rating of at least 10 Amps.

If the socket is not accessible once the appliance is built in, the electri-

cal installation must include suitable means of isolating the appliance

from the mains (e.g. fuse, cut-out, current trip or similar with a mini-

mum contact separation of 3 mm).

Attention: The mains connection cable may only be replaced by a skil-

led electrician. Please contact your dealer or our customer service

department for repairs.

AC 220 ... 240 V 50 Hz or

220 ... 240 V~50 Hz