Fujitsu fi-6770 Series Gebruikershandleiding - Pagina 24

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu fi-6770 Series. Fujitsu fi-6770 Series 26 pagina's. Image scanner
Ook voor Fujitsu fi-6770 Series: Handleiding voor installatieprocedures (6 pagina's), Brochure (2 pagina's), Aan de slag handleiding (14 pagina's), Aan de slag handleiding (26 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (22 pagina's)

Select the [Scan] menu

The [Scan Settings] dialog box appears.

Clear the [Save to file] checkbox.

Click the [Scanner Setting] button.

The scanner driver's setting dialog box appears.

Configure scanner settings such as the resolution and paper size.

■

FUJITSU TWAIN 32 scanner driver

Configure scan settings, and then click the [OK]

button.

■

FUJITSU ISIS scanner driver

Configure scan settings, and then click the [OK]

button.

If "Kofax VRS Scanner" does not appear in the list, check if the interface cable is properly connected

to SCSI/USB Connector 2.

If "Kofax VRS Scanner" does not appear even after you have connected the cable properly, then refer

to "Chapter 8 Troubleshooting" in the Operator's Guide.

[Scan Settings].

You only check the operation now, so you do not have to

save to file.

The setting dialog box of the scanner driver

may be displayed again after the [OK] button

is clicked. In such case, click the [Scan]

button in the dialog box.