Brother MFC-J430w Geavanceerde gebruikershandleiding - Pagina 33

Blader online of download pdf Geavanceerde gebruikershandleiding voor {categorie_naam} Brother MFC-J430w. Brother MFC-J430w 47 pagina's. Product safety guide - spanish
Ook voor Brother MFC-J430w: Handmatig (12 pagina's), Handmatig (21 pagina's), Handleiding productveiligheid (17 pagina's), Handleiding voor snelle installatie (37 pagina's), Veiligheidshandboek (17 pagina's), Handleiding voor snelle installatie (37 pagina's), Gebruikershandleiding (41 pagina's), Snelstarthandleiding (37 pagina's), Snelstarthandleiding (22 pagina's), Gebruikershandleiding (40 pagina's), (Spaans) Handboek (21 pagina's), (Spaans) Handboek (16 pagina's)

Pagina afdrukken
Brother MFC-J430w Geavanceerde gebruikershandleiding
d
Press a or b to choose Page Layout.
Press OK.
e
Press a or b to choose 2in1 (ID).
Press OK.
f
Press Black Start or Color Start.
The machine starts scanning the first
page.
g
After the machine has scanned one
side, press 1. Turn over the
identification card and press OK to scan
the other side.
Note
• Sort and Enlarge/Reduce are not
available with 2in1 (ID).
• If you are producing multiple color copies,
2 in 1 (ID) copy is not available.

Sorting copies using the ADF

You can sort multiple copies. Pages will be
stacked in the order 321, 321, 321, and so on.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Stack/Sort.
Press OK.
e
Press a or b to choose Sort.
Press OK.
f
If you do not want to change additional
settings, press Black Start or
Color Start.
Note
Fit to Page and Page Layout are
not available with Sort.
(COPY).

Adjusting Density

You can adjust the copy density to make
copies darker or lighter.
a
Press
b
Load your document.
c
Enter the number of copies you want.
d
Press a or b to choose Density.
Press OK.
e
Press c to make the copy darker or
press d to make the copy lighter.
Press OK.
f
If you do not want to change additional
settings, press Black Start or
Color Start.
Setting your changes as the
7
new default
You can save the settings for the copy
options you use most often by setting them as
the default, such as Quality,
Enlarge/Reduce, Density and
Page Layout. These settings will stay until
you change them again.
a
Press
b
Press a or b to choose your new setting.
Press OK.
Repeat this step for each setting you
want to change.
c
After changing the last setting, press
a or b to choose Set New Default.
Press OK.
d
Press 1 to choose Yes.
e
Press Stop/Exit.
Making copies
(COPY).
(COPY).
29
7
7
7