Brother MFC-J430w Veiligheidshandboek - Pagina 2

Blader online of download pdf Veiligheidshandboek voor {categorie_naam} Brother MFC-J430w. Brother MFC-J430w 17 pagina's. Product safety guide - spanish
Ook voor Brother MFC-J430w: Geavanceerde gebruikershandleiding (47 pagina's), Handmatig (12 pagina's), Handmatig (21 pagina's), Handleiding productveiligheid (17 pagina's), Handleiding voor snelle installatie (37 pagina's), Handleiding voor snelle installatie (37 pagina's), Gebruikershandleiding (41 pagina's), Snelstarthandleiding (37 pagina's), Snelstarthandleiding (22 pagina's), Gebruikershandleiding (40 pagina's), (Spaans) Handboek (21 pagina's), (Spaans) Handboek (16 pagina's)

Compilation and Publication

Under the supervision of Brother Industries, Ltd., this manual has been compiled and published,

covering the latest product descriptions and specifications.

The contents of this manual and the specifications of this product are subject to change without

notice.

Brother reserves the right to make changes without notice in the specifications and materials

contained herein and shall not be responsible for any damages (including consequential) caused

by reliance on the materials presented, including but not limited to typographical and other errors

relating to the publication.

Put your machine on a flat, level, stable surface that is free of vibration and shocks, such as a

desk. Put the machine near a telephone wall jack and a standard AC power outlet. Choose a

location where the temperature remains between 50F and 95F (10C and 35C) and the

humidity is between 20% to 80% (without condensation).

WARNING

DO NOT expose the machine to direct sunlight, excessive heat, open flames, salty or corrosive

gasses, moisture or dust. DO NOT place your machine on a carpet or rug, as this will expose it

to dust. Doing so may create a risk of an electrical short or fire. It may also damage the machine

and/or render it inoperable.

DO NOT place the machine near heaters, air conditioners, electrical fan, refrigerators, or water.

Doing so may create the risk of a short circuit or fire should water come into contact with the

machine (including condensation caused by heating/air conditioning/ventilation equipment).

DO NOT place the machine near chemicals or in a place where chemicals could be spilled on it.

Should chemicals come into contact with the machine, there may be a risk of fire or electric shock.

In particular, organic solvents or liquids such as benzene, paint thinner, polish remover, or

deodorizer may melt or dissolve the plastic cover and/or cables, resulting in a risk of fire or electric

shock. These or other chemicals may also cause the machine to malfunction or become discolored.