Fujitsu FTP-633MCL400 Specificatieblad - Pagina 3
Blader online of download pdf Specificatieblad voor {categorie_naam} Fujitsu FTP-633MCL400. Fujitsu FTP-633MCL400 12 pagina's. Battery drive, micro line thermal printer 3" type mechanism and interface board
Pagina afdrukken
(Continued)
Item
For print head
Operating
voltage
For motor
For logic
Weight
Printer mechanism
Dimensions
Interface board
Dimensions
Thermal head life
Operating temperature
Environmental
Operating humidity
conditions
Storage temperature
Storage humidity
Head temperature
Detection
Paper out/Mark detect
Voltage
Head-up
Paper width
Recommended thermal sensitive paper
*1: Character composition for single density reduced mode is the same as for single density standard mode.
*2: The data to be printed is automatically read out by the printer driver equipment memory (host system frame
memory). The communication is parameter transfer.
*3: Temperature range for guaranteed printing density. It can be operated in the range of 0 to +40 C.
FTP-633MCL400/FTP-623DCL002
4.2 to 8.5 VDC (4 or 5 Ni-Cd or Ni-MH batteries, equivalent to 2 Li-ion)
Approximately 3.0 A (peak value, 7.2 V, 100% printing ratio)
4.2 to 8.5 VDC (4 or 5 Ni-Cd or Ni-MH batteries, equivalent to 2 Li-ion)
Average 0.7 A or less
5 VDC
5%, 0.15 A
Mechanism: approximately 84 g. Interface board: approximately 60 g
85 (W)
49 (D)
20 (H) mm (excluding knob, lever, and flexible PC board)
108 (W)
91 (D)
18 (H) mm
8
Pulse durability : 1
10
pulse/dot (using Fujitsu Takamisawa's standard
driving method)
Wear resistance: 50 km (at 25% printing ratio)
3
+5 to +40 C*
20 to 85% RH (no condensation)
–20 to +60 C (excluding paper)
5 to 95% RH (no condensation)
By thermistor
By photointerrupter (command set)
By micro controller
By microswitch
+0
70 mm
–1
1 ply (roll) : FTP-030PG021
2 ply (TCC) : FTP-030P8021
Specifications
Long life (roll) : FTP-030PR202
3