Brother MFC490CW - Color Inkjet - All-in-One Handleiding voor snelle installatie - Pagina 7
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 48 pagina's. Mac network connection
Ook voor Brother MFC490CW - Color Inkjet - All-in-One: Handleiding voor snelle installatie (47 pagina's), Installatie en installatie (5 pagina's), Aansluithandleiding (6 pagina's), Instructies voor reparatie (2 pagina's)
Pagina afdrukken
5
Check the print quality
Important
Make sure you put paper in the upper tray for
the initial setup.
a
When the preparation process has finished, the
LCD shows this message
.
Set Paper and Press
Start
Press Color Start.
b
Check the quality of the four color blocks
the sheet. (black/yellow/cyan/magenta)
c
If all lines are clear and visible, press 1 (Yes)
on the dial pad to finish the quality check.
<Black>
OK
If you can see missing short lines, press 2 (No)
on the dial pad and go to d.
<Black>
Poor
on
a
1 1
<Color>
OK
<Color>
Poor
d
The LCD asks you if the print quality is OK for
black and color. Press 1 (Yes) or 2 (No) on the
dial pad.
Black OK?
Yes
No
After pressing 1 (Yes) or 2 (No) for both black
and color, the LCD shows:
Start Cleaning?
Yes
No
e
Press 1 (Yes), the machine will then start
cleaning the colors.
f
After cleaning is finished, press Color Start.
The machine starts printing the Print Quality
Check Sheet again. Go back to b.
6
Choose your language
(If needed)
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Local Language.
Press OK.
d
Press a or b to choose your language.
Press OK.
e
Press Stop/Exit.
Press
Press
Press
Press
7