Brother MFC490CW - Color Inkjet - All-in-One Handleiding voor snelle installatie - Pagina 8
Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Brother MFC490CW - Color Inkjet - All-in-One. Brother MFC490CW - Color Inkjet - All-in-One 47 pagina's. Mac network connection
Ook voor Brother MFC490CW - Color Inkjet - All-in-One: Handleiding voor snelle installatie (48 pagina's), Installatie en installatie (5 pagina's), Aansluithandleiding (6 pagina's), Instructies voor reparatie (2 pagina's)
Pagina afdrukken
7
Choose a Receive Mode
There are four possible receive modes: Fax Only,
Fax/Tel, Manual and External TAD.
Do you want to use the telephone features of your
machine (if available) or an external telephone or
external telephone answering device connected on the
same line as the machine?
Yes
Are you using the voice message
function of an external telephone
answering device?
No
Do you want the machine to
answer fax and telephone calls
automatically?
Yes
No
Yes
a
Press Menu.
b
Press a or b to choose Initial Setup.
Press OK.
c
Press a or b to choose Receive Mode.
d
Press d or c to choose the receive mode.
Press OK.
e
Press Stop/Exit.
For details, see Using receive modes in
Chapter 6 of the User's Guide.
8
No
Fax Only
Your machine
automatically answers
every call as a fax.
Fax/Tel
Your machine controls
the line and
automatically answers
every call. If the call is
not a fax, the telephone
will ring for you to pick
up the call.
Manual
You control the
telephone line and must
answer every call
yourself.
External TAD
Your external telephone
answering device (TAD)
automatically answers
every call. Voice
messages are stored
on the external TAD.
Fax messages are
printed.
8
Set the LCD contrast
(If needed)
If you are having difficulty reading the LCD, try
changing the contrast setting.
a
Press Menu.
b
Press a or b to choose General Setup.
Press OK.
c
Press a or b to choose LCD Settings.
Press OK.
d
Press a or b to choose LCD Contrast.
e
Press d or c to choose Light, Med or Dark.
Press OK.
f
Press Stop/Exit.
Note
You can also adjust the angle of the display by
lifting it.