Brother PJ662 PocketJet 6 Print Engine with Bluetooth Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother PJ662 PocketJet 6 Print Engine with Bluetooth. Brother PJ662 PocketJet 6 Print Engine with Bluetooth 14 pagina's. P-touch editor software
Ook voor Brother PJ662 PocketJet 6 Print Engine with Bluetooth: Handleiding voor snelle installatie (7 pagina's), Gebruikershandleiding (26 pagina's)

Brother PJ662 PocketJet 6 Print Engine with Bluetooth Gebruikershandleiding
Use the rechargeable battery only with approved devices. Use with other devices may result in
lower battery performance or battery life.
Liquid (electrolyte) leaking from the printer or rechargeable battery may indicate that the
rechargeable battery is damaged. If the rechargeable battery leaks, immediately move the
printer or rechargeable battery away from flames.
Do not touch the electrolyte. If electrolyte gets in the eyes, do not rub the eyes. Immediately
rinse liberally with tap water or other clean water and seek the advice of a medical professional.
If left alone, the electrolyte could cause eye damage. If the liquid contacts your skin or clothing,
immediately rinse them with water. Place the printer in a bag to isolate it.
Do not put the rechargeable battery, or a printer with the rechargeable battery installed, into a
microwave oven or a high pressure container.
Printer
Do not use the printer where its use is prohibited, such as on an airplane. This could affect
equipment, resulting in an accident.
Do not use the printer in special environments, such as near medical equipment. Electromagnetic
waves may cause the equipment to malfunction.
Do not insert foreign objects into the printer or its connectors and ports, otherwise fire, electric
shock, or damage may result.
If foreign objects are dropped into the printer, immediately turn it off, disconnect the AC
adapter/DC cable from the electrical outlet, and then contact the sales representative where the
printer was purchased. If you continue to operate the printer, fire, electric shock, or damage may
result.
Do not operate, charge, or store the printer in the following locations, otherwise leaking, fire, electric
shock, or damage may result.
Near water, such as in a bathroom or near a water heater, or in an extremely humid location
In a location where it is exposed to rain or moisture
In an extremely dusty location
In an extremely hot location, such as near naked flames, heaters, or in direct sunlight
In a closed car under a hot sun
In a location where condensation may form
If you see lightning nearby, disconnect the AC adapter/DC cable from the electrical outlet. If
lightning strikes nearby, do not touch the printer, since there is a risk of electric shock.
Do not try to disassemble or alter the printer, otherwise fire, electric shock, or damage may result.
For servicing, adjustments or repairs, contact the sales representative where the printer was
purchased. (The warranty does not cover repairs for damage resulting from disassembly or
alterations performed by the user.)
DANGER
WARNING
5