Fujitsu S510M - ScanSnap - Document Scanner Aan de slag handleiding - Pagina 17

Blader online of download pdf Aan de slag handleiding voor {categorie_naam} Fujitsu S510M - ScanSnap - Document Scanner. Fujitsu S510M - ScanSnap - Document Scanner 35 pagina's. Color image scanner
Ook voor Fujitsu S510M - ScanSnap - Document Scanner: Installatieprocedures (3 pagina's), Specificaties (2 pagina's), Snelle installatiehandleiding (2 pagina's), Aan de slag handleiding (24 pagina's), Reinigingsinstructies (2 pagina's), Reinigingsinstructies (2 pagina's)

2.2 Connecting the ScanSnap to Your Computer

Follow the procedure below to connect the ScanSnap to your computer.

1. Connect the ScanSnap to a power outlet with the power cable.

2. Connect the ScanSnap to your computer with the USB cable.

• Be sure to connect the power cable before connecting the USB cable.

ATTENTION

• Be sure to install the supplied programs before connecting the ScanSnap to your

computer. For details about the installation, refer to "Installing ScanSnap Manager" (page

15).

The following describes each of the above two procedures.

Connecting the Power Cable

■

Connect the AC cable and adapter as shown below.

CAUTION

Do not use AC adapters other than the following.

Manufacturer

LEI

SANKEN ELECTRIC CO,. LTD

1. Connect the AC cable to the AC adapter (collectively called the power cable).

Use only the supplied AC cable and AC adapter (power cable).

ATTENTION

2. Plug the power cable into the AC adapter connector on the back side of the ScanSnap, and

the other end to a wall outlet.

AC-adapter model number

NU40-2160250-I3

SEB55N2-16.0x (x= A-Z or Blank)

AC cable

AC adapter connector

AC adapter

Outlet

ScanSnap S510M Getting Started