Fujitsu ScanPartner 15C Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ScanPartner 15C. Fujitsu ScanPartner 15C 26 pagina's. Image scanner
Ook voor Fujitsu ScanPartner 15C: Gebruikershandleiding (23 pagina's), Specificaties (2 pagina's), Upgrade handleiding (6 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (7 pagina's), Installatieprocedures (5 pagina's)

3.3 Replacing the ADF snap-in pad module

After scanning approximately 150,000 pages through the ADF, the pad spring

may be worn out and you may experience problems with document feeding.

In this case, it is highly recommended to replace the pad module with a new

one. For ordering the pad module, please consult your nearest dealer and

follow the procedure below to replace it.

Disassembling Procedure

1. Open the ADF front cover by depressing the ADF release button.

Remove the ADF snap-in pad module by pulling out the upper part

of the pad clamp as shown in Figure 3-3.

ADF cover

ADF release

button

Upper part of

the pad

clamp

Figure 3-3 Remove the pad module

3-4

ADF unit