Fujitsu ScanPartner 15C Instructies voor vervanging en reiniging van verbruiksartikelen - Pagina 6
Blader online of download pdf Instructies voor vervanging en reiniging van verbruiksartikelen voor {categorie_naam} Fujitsu ScanPartner 15C. Fujitsu ScanPartner 15C 7 pagina's. Image scanner
Ook voor Fujitsu ScanPartner 15C: Gebruikershandleiding (23 pagina's), Specificaties (2 pagina's), Upgrade handleiding (6 pagina's), Gebruikershandleiding (26 pagina's), Installatieprocedures (5 pagina's)
Pagina afdrukken
ScanPartner 15C, 600C & 620C C
6
R
ONSUMABLE
EPLACEMENT AND
C
R
LEANING THE
OLLERS WITH THE
The cleaning papers are designed to remove only loose paper dust and ink
from the rollers. Use the cleaning paper approximately every 1,000 sheets
scanned. They are to be used in between the thorough cleanings of the
scanner. Using the cleaning paper does not take the place of the
more complete cleanings described later in this section
•
Set the Hopper Guides to the widest width possible.
ADF (Automatic
Document Feeder)
•
Spray the cleaning paper lightly with F1 Cleaner and place the Clean-
ing Paper against the right edge of the Hopper Guide. Using the
scanning application scan the cleaning paper. Do Not Save These
Images. This operation is used only to pass the cleaning paper
through the paper feed path.
•
Place the Cleaning Paper against the Left Hopper Guide and perform
the previous step.
•
Check the path to see if it needs further cleaning. If you find debris in
the paper path perform this cleaning or the
L
-F
C
)
INT
REE
LOTHS
C
I
LEANING
NSTRUCTIONS
C
P
LEANING
APER
Left Sheet
Guide
(C
LEANING THE
in the following steps.
Input Tray and Wire
Guide
Cleaning
Paper
Right Sheet
Guide
ADF
WITH