Fujitsu ScanPartner 620C Gebruikershandleiding - Pagina 19

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu ScanPartner 620C. Fujitsu ScanPartner 620C 28 pagina's. Image scanner
Ook voor Fujitsu ScanPartner 620C: Specificaties (2 pagina's), Instructies voor vervanging en reiniging van verbruiksartikelen (7 pagina's), Installatieprocedures (5 pagina's)

3.3

REPLACING THE ADF SNAP-IN PAD MODULE

After scanning approximately 150,000 pages through the ADF, the pad spring may become worn

out and you may experience problems with document feeding. In this case, it is highly

recommended to replace the pad module with a new one. To order the pad module, please consult

your nearest dealer and follow the procedure below to replace it.

Disassembling Procedure

Open the ADF front cover by depressing the ADF release button.

Remove the ADF snap-in pad module by pulling out the upper part of the pad clamp as

shown in Figure 3-3.

Upper Part of ADF Pad Clamp

ADF

Cover

Figure 3-3 Remove the pad module

ADF Unit

ADF Release

Button

3-4