Brother Quattro 6000D Handmatig - Pagina 40

Blader online of download pdf Handmatig voor {categorie_naam} Brother Quattro 6000D. Brother Quattro 6000D 42 pagina's. Kit de actualización iii
Ook voor Brother Quattro 6000D: Bedieningshandleiding (50 pagina's), Bedieningshandleiding (6 pagina's), Gebruikershandleiding (48 pagina's), Bedieningshandleiding (29 pagina's), Bedieningshandleiding (21 pagina's), (Engels) Gebruiksaanwijzing (49 pagina's), (Engels) Gebruiksaanwijzing (21 pagina's), (Engels) Gebruiksaanwijzing (48 pagina's)

Brother

Cover Stitch

Feet

Bias Tape Binding Set

Hemming Set

Bias Tape Binding Set

Attaches 6 or 12 mm (approx. 1/4 to 1/2 inch) bias tapes as folding

them.

Attaching 6 mm (approx. 1/4") bias tape:

Use the small bias tape sliding plate with the LC2 presser foot.

Attaching 12 mm (approx. 1/2") bias tape:

Use the large bias tape sliding plate with the LC1 presser foot (included with your Cover

Stitch).

1. Set up your machine for a chain stitch, the center needle.

2. Insert the tab on the bias tape attachment into the front cover slot.

3. Set the bias tape though the holder (cut the end of fabric pointed so that it is easily set

through the holder).

4. Sew as holding the fabric lightly with a tweezers.

SA224CV

SA221CV

Hemming Set

Finishes hems easily and quickly. The

stitches are always smooth.

1. Set up your machine for a cover stitch, with

the LC1 presser foot included in the machine.

2. Attach the hem positioning plate A/B to the

hemming attachment, and attach it to your

machine.

3. Fold fabric and set it into the guide.

4. Sew.

Top Stitching Foot Set

Use included presser foot to top stitch with 3 or 6 mm (approx. 1/8 or

1/4 inch) wide cover stitch.

1. Set T1/T2 presser foot.

2. Set up your machine for a cover stitch, with 3 or 6 mm wide cover stitch.

3. Open the seams.

4. Align the fabric joint and the groove of the presser foot, and sew.

Brother

Cover Stitch

Feet

Top Stitching Foot Set

SA226CV