Fujitsu LIFEBOOK Notebook Gebruikershandleiding - Pagina 9
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Fujitsu LIFEBOOK Notebook. Fujitsu LIFEBOOK Notebook 39 pagina's. Lifebook notebook
Ook voor Fujitsu LIFEBOOK Notebook: Gebruikershandleiding (44 pagina's), Algemene reiniging (3 pagina's)
Pagina afdrukken
AUSTRALIAN REGULATIONS
Important Health and Safety Information
This notebook complies with the relevant safety
regulations for data processing equipment. If you
have questions about using your notebook in a
particular area, please contact your sales outlet
or our Hotline/Help Desk.
Additional safety notes for devices with
modem
WARNING
FOR SAFETY REASONS, ONLY CONNECT
EQUIPMENT WITH A TELECOMMUNICATIONS
COMPLIANCE LABEL. THIS INCLUDES
CUSTOMER EQUIPMENT PREVIOUSLY
LABELLED PERMITTED OR CERTIFIED.
Connection of Non Certified / Approved
peripherals may result in the equipment
operating outside the Australian EMI
Standards.
Modems connected to the Australian
telecommunications network must be operated
in accordance with the Labelling Notice. This
modem has been specifically configured to
ensure compliance with the ACMA Standards.
Do not adjust your modem or software outside
the values indicated below. To do so would
result in your modem being operated in a non-
compliant manner.
The unit shall be connected to Telecommunication
Network through a line cord, which meets the
requirements of ACMA AS / ACIF S008:2006.
The equipment shall be powered through an
Australian Approved mains cord set. When the
Secondary Landscape Orientation of the tablet
is held close to the body, the antenna must be
in closed condition to avoid physical damage to
the Antenna.
Copyright
Call Attempts / Retries:
Applications software shall be confi gured so
that no more than 3 attempts are made to
establish a connection to a given number (Note:
if the modem can detect service tones, up to 10
attempts can be made). If the call sequence is
unsuccessful, there shall be a delay of at least
30 minutes before attempting to call the number
again.
Failure to set the modem and any application
software used with the modem, to the
values shown above will result in the modem
being operated in a non-compliant manner.
Consequently, this would be in violation of
the Labelling Notice for this equipment and
the Telecommunications Act 1997 prescribes
penalties for the connection of
non-compliant equipment.
ix