Fujitsu Lifebook T3010 Bios Handleiding - Pagina 7

Blader online of download pdf Bios Handleiding voor {categorie_naam} Fujitsu Lifebook T3010. Fujitsu Lifebook T3010 27 pagina's. T series

Pagina afdrukken

Menu Field

Options

■

Heads:

A number between

1 and 16

■

Sectors:

A number between

0 and 63

■

Maximum

Display only

Capacity:

■

Multi-Sector

Disabled

Transfers:

■

2 Sectors

■

4 Sectors

■

8 Sectors

■

16 Sectors

■

LBA Mode Control:

Disabled

■

Enabled

■

Transfer Mode:

Standard

■

Fast PIO 1

■

Fast PIO 2

■

Fast PIO 3

■

Fast PIO 4

■

Multiword DMA 1

■

Multiword DMA 2

■

Ultra DMA Mode:

Disabled

■

Mode 0

■

Mode 1

■

Mode 2

■

Mode 3

■

Mode 4

■

Mode 5

C A U T I O N

■

A bootable CD-ROM may have either a floppy disk or hard drive format. When the bootable CD-ROM is used, the

drive allocations change automatically without changing the BIOS setup. If a floppy disk format CD-ROM is used, the

CD-ROM becomes Drive A. The CD-ROM will only take drive C: (hard drive format) if the internal hard drive is not

present or is disabled. The bootable CD-ROM can never use a C: designation if a formatted internal hard drive is

present since the C: designator is always reserved for the internal hard drive.The boot sequence ignores the new drive

designations, however, your application software will use the new designations.

Be careful of the operating environment when booting from a CD-ROM or you may overwrite files by mistake.

■

Exiting from Main Menu

When you have finished setting the parameters on this menu, you can either exit from the setup utility, or move to

another menu. If you wish to exit from the setup utility, press the [Esc] key or use the cursor keys to go to the Exit

menu or to move to another menu.

Default

Description

–—

This item is active only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

–—

This item is active only when Hard Disk is selected as type. You can

change the value by incrementing (pressing the [Spacebar]) or by

typing in the number.

–—

Displays the maximum capacity of the drive calculated from the

parameters of the hard disk when Auto is selected and the type

is identified as hard disk.

[16 Sectors]

This option cannot be changed when Auto is selected. Specify the

number of sectors per block for multiple sector transfer.

[Enabled]

Enables or disables logical Block Addressing in place of Cylinder,

Head, Sector addressing. This option cannot be changed when Auto

is selected.

[Multiword

Selects the method for moving data to/from the drive. Autotype the

DMA 2]

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

[Disabled]

Selects the method for moving data to/from the drive. Autotype the

drive to select the optimum transfer mode. This option cannot be

changed when Auto is selected.

M a i n M e n u