Brother DSMOBILE 600 Gebruikershandleiding - Pagina 23
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Brother DSMOBILE 600. Brother DSMOBILE 600 42 pagina's. Users manual - english
Ook voor Brother DSMOBILE 600: Technische specificaties (2 pagina's), Gebruikershandleiding (44 pagina's)
Pagina afdrukken
Calibration is critical because it allows the image quality to be "balanced" for your computer
and scanner combination. If you switch the computer that you use with your scanner or
change scanners, you must calibrate again.
Note that you must be logged in as an Administrator to calibrate the system. See "Setting
Administrator Privileges" p. 17 for further information.
This calibration process uses the special black and white calibration sheet (see picture on page
iv) that was included with your scanner (Visit
order additional calibration sheets and cleaning kits). When calibrating, make sure the side
with the black bar is facing down and note the direction of the arrows for proper insertion.
If you lose or forget the black and white calibration paper that was included with your scanner,
you can use any plain "White" (the brighter the "White" the better) piece of letter size (or A4)
printer paper to perform the calibration. Simply fold the paper in half and insert the end
opposite the fold into the scanner first when calibrating. The following message will be
displayed (see below).
General Guidelines
The "Image Capture" software provided on Macintosh systems does not require you to
calibrate your system on first use as is the case with Windows systems. However, if you find
that the initial scans do not look as good as you expected, perhaps they are too dark or the
color is wrong, you will want to perform a manual calibration to correct and improve the
scanned images.
1. Turn your Macintosh computer on.
2. Plug your DSmobile 600 scanner into an available USB port on the Macintosh.
3. Select "Image Capture" from the Applications folder.
4. Close the DSmobile 600 window (do not minimize it).
5. From the "Devices" menu, choose "Browse Devices."
6. Click the "Use TWAIN UI" button to the right of the "DSmobile 600" listing, and then
close the window.
7. Click the "Scan" button.
8. Click the "Calibrate" button.
9. Insert the black and white calibration sheet with the single arrow on top and the black
strip down. Alternatively, you can use a blank sheet of white paper.
10. Click the "Calibrate" button again.
11. The calibration sheet will move forward and back in the scanner then a window
displaying "Calibration was successful" will be displayed.
12. Click "OK" to complete the calibration.
13. Select the type of document, scan size, resolution, and click "SCAN" to proceed to scan
documents as needed.
CALIBRATION
http://www.brothermobilesolutions.com
- 19 -
to