Fujitsu Stylistic 3400 Installatie- en gebruikershandleiding - Pagina 4

Blader online of download pdf Installatie- en gebruikershandleiding voor {categorie_naam} Fujitsu Stylistic 3400. Fujitsu Stylistic 3400 8 pagina's. Wall-mount cradle
Ook voor Fujitsu Stylistic 3400: Gebruikershandleiding (3 pagina's), Installatiehandleiding (4 pagina's), Gebruikershandleiding (2 pagina's), Gebruiksaanwijzing (1 pagina's), Installatiehandleiding (1 pagina's), Montage- en gebruiksaanwijzing (4 pagina's)

Installing a keyboard

The Stylistic portfolio will accommodate two different types

of keyboard: a USB mini keyboard, or a small wireless

keyboard.

USB keyboard

To install a mini USB keyboard, remove the two spacer pads

that are attached to the Velcro® strips on the base of the

portfolio (see Figure 3). Save the pads for possible future use

with a wireless keyboard.

Position four unused Velcro® squares at the top and bottom

of the two strips, such that they are all in contact with the

USB keyboard when it is laid into the portfolio. Peel the

backing from the squares, and position the keyboard directly

over them. Carefully lay the keyboard onto the squares and

press down firmly to attach the squares to the bottom of the

keyboard. See Figure 2 for a fully assembled system in the

portfolio with a wired USB mini keyboard installed.

Secure the keyboard cable with the Velcro® straps behind

the pen holder. Route the cable end through the elastic guide

located adjacent to the USB port.

Always disconnect the USB cable from the USB

port prior to closing the portfolio case.